10ft MULTI-drill | ND-120

Cover for storage
Rear Step and Walk Board
Weight Bracket
Aux. Seedbox
4 Stainless Steel Seed
Plates for Various Seeds
Variable Speed Electric Drive
Conventional and No-Till Capability

Drill Type: No-till/Conventional
Meter System: Slide Plate control
Overall Width: 140 in.
Working Width: 126 in.
Dry Weight, (No Aux Box): 4800 lbs
Hitch Type: Cat. II, Cat III 3 point lift (standard) or tow (tow kit optional)
N# of Openers: 14
Spacing: 9 in
HP Required: 80+
Machine Length: 94 in
Machine Height: 64 in
Transport Height: N/A

SEED CAPACITY
Main Box: 18 BU
Aux. Box Weight: 440 lbs.
Small Box: 6.6 BU
Depth Range: 0”-3”
Weight Bracket Capacity: 1000 lbs.

5ft MULTI-drill | ND-60

Cover for storage
Rear Step and Walk Board
Aux. Seedbox
4 Stainless Steel Seed plates for Various Seeds
Variable Speed Electric Drive
3pt. Lift
Cat I/II Hitch
Quick Hitch Compatible
Conventional and No-Till Capability

CM7000-LD

This round module spear can be adapted to loaders, tele-handlers and many other types of lifts.

Length- 33” (without spears)
103” (with spears)
Width- 65”
Height- 56” (storage position)
Weight- 841 lbs.
Hitch: Mounting Plate Required
Lift System:
Lifting Capacity: 7000 lbs.
Spear:
2 ¼ Round Special Alloy Steel
Torque Requirements:
¼ UNC Standard Bolt: 11 ft. lbs. (14 N-m)
5/16 UNC Standard Bolt: 21 ft lbs. (28 N-m)
½ UNC Standard Bolt: 85 ft. lbs (120 N-m)

CM7000-L

This 3 pt. lift round module spear is great for staging modules in the field or at the gin.

Length- 33” (without spears)
103” (with spears)
Width- 65”
Height- 56” (storage position)
Weight- 1265 lbs.
Hitch- CAT III, IVN, or IV
Lift System:
Lifting Capacity: 7000 lbs.
Module Clearance Height: 30” or Higher (depending on tractor)
Spear:
2 ¼ Round Special Alloy Steel
Torque Requirements:
¼ UNC Standard Bolt: 11 ft. lbs. (14 N-m)
5/16 UNC Standard Bolt: 21 ft lbs. (28 N-m)
½ UNC Standard Bolt: 85 ft. lbs (120 N-m)

CM7000-HL

Carry cotton high over stalks to prevent tearing and ripping.

Length- 58” (without Spears) 146” (with spears)
Width- 74”
Height- 58” (Storage position)
Weight- 2891 lbs.
Hitch- CAT III, IVN, or IV
Hydraulic Cylinder-
Bore: 6”
Stroke: 20”
Max Working Pressure: 3000 psi
Lift System:
Lifting Capacity- 7000 lbs.
Module Clearance height:
60” Lift Links @ 39” or higher (depending on tractor)
Spear:
2 ¼ Round Special Alloy Steel
Torque Requirements:
¼ UNC Standard Bolt: 11 ft. lbs. (14 N-m)
5/16 UNC Standard Bolt: 21 ft lbs. (28 N-m)
½ UNC Standard Bolt: 85 ft. lbs (120 N-m)

12ft MULTI-drill | ND-144

Cover for storage
Rear Step and Walk Board
Weight Bracket
Aux. Seedbox
4 Stainless Steel Seed
Plates for Various Seeds
Variable Speed Electric Drive
Conventional and No-Till Capability

Drill Type: No-till/Conventional
Meter System: Slide Plate control
Overall Width: 158 in
Working Width: 144 in
Dry Weight, No Small Box: 4800 lbs.
Hitch Type: Cat. II/III 3 point/Pull Type
# of Openers: 16
Spacing: 9 in
HP Required: 90+
Machine Length: 94 in
Machine Height: 64 in
Transport Height: N/A / 80

SEED CAPACITY
Main Box: 20.6 BU
Small Box: 7.6 BU
Depth Range: 0”-3”
Weight Bracket Cap.: 1000 lbs.

8ft MULTI-drill | ND-96

Cover for storage
Rear Step and Walk Board
Weight Bracket
Aux. Seedbox
4 Stainless Steel Seed
Plates for Various Seeds
Variable Speed Electric Drive
Conventional and No-Till Capability

Drill Type: No-till/Conventional
Meter System: Slide Plate control
Overall Width: 116 in
Working Width: 90 in
Dry Weight, No Small Box: 2850 lbs.
Hitch Type: Cat. II 3 point /Pull Type
# of Openers: 10
Spacing: 9 in
HP Required: 50+
Machine Length: 59 in
Machine Height: 64 in
Transport Height: N/A / 72

SEED CAPACITY
Main Box: 12.9 BU
Small Box: 4.75 BU
Depth Range: 0”-3”
Weight Bracket Cap.: 1000 lbs.

6ft MULTI-drill | ND-72

Cover for storage
Rear Step and Walk Board
Weight Bracket
Aux. Seedbox
4 Stainless Steel Seed
Plates for Various Seeds
Variable Speed Electric Drive
Conventional and No-Till Capability

5ft MULTI-drill | ND-60T

Cover for storage
Rear Step and Walk Board
Aux. Seedbox
4 Stainless Steel Seed plates for Various Seeds
Variable Speed Electric Drive
Self-Contained Lift
Conventional and No-Till Capability
Designed to operate with UTV or compact tractors.

AG144 AGRI-vator - 12'

Facilitates seed growth and helps you get the results you want for your farm. Break apart the soil without doing damage to the surface turf.

Weight 2825 lbs
Center Drive Gearbox 1:1.5 Tee
End Drive 3 Cx Belts (Left End)
Tine Vibration Frequency @ 540 PTO RPM = 1026 Cycles/Min
Side-to-Side Tine Travel 2 1/4 inches
Vibrating Depth 6 Inches
Aeration Density 5 Holes per sq. ft.
Tines 3/4 X 6” Forged And Hardened (144)
Rotor Bearings Double Sealed Tapered Roller
Drive Line 1 3/8” Spline w/ Safety Shield
Finish Black Acrylic w Grey Trim
Tractor HP required- 45, 60, 80

AG96 AGRI-vator - 8'

Facilitates seed growth and helps you get the results you want for your farm. Break apart the soil without doing damage to the surface turf.

Weight 2045 lbs
Center Drive Gearbox 1:1.5 Tee
End Drive 2 Cx Belts (Left End)
Tine Vibration Frequency @ 540 PTO RPM = 1026 Cycles/Min
Side-to-Side Tine Travel 2 1/4 inches
Vibrating Depth 6 Inches
Aeration Density 5 Holes per sq. ft.
Tines 3/4 X 6” Forged And Hardened (144)
Rotor Bearings Double Sealed Tapered Roller
Drive Line 1 3/8” Spline w/ Safety Shield
Finish Black Acrylic w Grey Trim
Tractor HP required- 45, 60, 80

AG72 AGRI-vator - 6'

Facilitates seed growth and helps you get the results you want for your farm. Break apart the soil without doing damage to the surface turf.

Weight 1630 lbs
Center Drive Gearbox 1:1.5 Tee
End Drive 3 Cx Belts (Left End)
Tine Vibration Frequency @ 540 PTO RPM = 1026 Cycles/Min
Side-to-Side Tine Travel 2 1/4 inches
Vibrating Depth 6 Inches
Aeration Density 5 Holes per sq. ft.
Tines 3/4 X 6” Forged And Hardened (144)
Rotor Bearings Double Sealed Tapered Roller
Drive Line 1 3/8” Spline w/ Safety Shield
Finish Black Acrylic w Grey Trim
Tractor HP required- 45, 60, 80

AE40E AERA-vator Tow Behind

If you have tight spaces that need maintaining, the AE-40E: AERA-vator is the turf aerator for you. As a tow-behind used in conjunction with small mowers or other vehicles, its versatility is unmatched.

WEIGHT: 577 lbs.
OVERALL WIDTH: 47″
WORKING WIDTH: 40″
ENGINE: 11 HP Honda w/ 6:1 Reduction
END DRIVE: 2- Power Rated Belts
TINES: 9/16″ x 3 ¾ Forged and Hardened
TINE VIBRATION FREQUENCY: 825 Cycles/Min @ 3600 RPM
OUTSIDE-TO-OUTSIDE TINE TRAVEL: 1 3/8″
VIBRATION DEPTH: 3 ¾” including tine Nut
AERATION DENSITY: 8 holes per sq/ft.
ROTOR BEARINGS: Double sealed tapered Roller
FINISH: Black & Grey Acrylic
VOLTAGE: 12 V
TONGUE DRAFT PULL: 100 lbs. (Operation)
WEIGHT CAPACITY: 400 lbs.

Groundmaster® 360: AERA-vator

The Groundmaster® 360 works with four of the 1st Products 60” shafts (AERA-vator 60” Shaft, Slicer 60” Shaft, Multi-tine 60” Shaft , Coring 60” Shaft) enhancing and complimenting the versatility of the GM®360. Order below or click here for more information about the Groundmaster commercial aerator.

Weight 479 lbs
Working Width60″
Overall width 66″
Center Drive Gearbox 1:3 Rt. Angle
End Drive (4) BX 46 Belts (left end)
Tine Vibration Frequency @2000 PTO RPM=800 Cycles/Min
Lift manual or optional Hydraulic Top Link
Finish Black Acrylic w/ Grey Trim
Power Source see specs of Toro Groundsmaster 360
Universal Shaft System

Universal AERA-vator 60T

The UA60T AERA-vator is a self-contained, towable 60” AERA-vator that trails easily behind any UTV or commercial grade mower. Its features are desirable for any school, municipality or sports complex. The self-contained aerator is powered by a 23hp engine and operated by a remote lanyard. The Universal Shaft System is integrated into the UA60T for added versatility.

Weight 1041 lbs
Working width 60″
Overall Width 94″
Center Drive Gearbox 1:3 Rt. Angle
End Drive (4) BX Belts (left end)
Tine Vibration Frequency @3600 Engine RPM=800 Cycles/ Min.
Engine Gas Honda 28 HP Horizontal Shaft
Finish Black Acrylic w/ Grey Trim
Lift Hydraulic
Electric 12V Electric Clutch Actuated
Operation Controller Tethered Handheld
Operation Position rear or offset
Transportation DOT approved for Highway use (for transport only)
Provided with Certificate of Origin

DO40 AERA-vator Mini Skid Steer

Our 1st Products DO-40: AERA-vator is a versatile soil aerator attachment for your mini-skid steer /compact utility loader and is the perfect tool for construction and renovation projects. The DO-40 side to side tine movement levels heavy traffic areas and prepares a great seedbed with less prep work. With the optional seeder, seed placement is broadcast on top of the rotors allowing seeding in both forward and reverse, reducing turnaround time.

Weight- 312 lbs.
Drive- Hydraulic motor
End Drive- 2” BX42 belys (left end)
Side to Side tine travel- 1 3/8”
Vibrating depth- 3 ¾”
Overall Width- 44”
Working width- 40”
Aeration density- 9 holes per sq. ft.
Tines- 9/16”x 3 ¾” forged and hardened
Rotor Bearings- Double Sealed Tapered Roller
Finish- Black Acrylic w/ Gray Trim
Minimum of 1800 PSI @ 8 GPM

VC40/VC60 Sprig Digger

The VC40 and VC60 can both be converted into a sprig digger simply by changing the VERTI-cutter shaft to the Sprig Digger shaft. Both have a 40″ working width.

Weight- 91 lbs
Blade- ¼” Hardox Banana Blade
Working width- 36”
Spacing- 3”
Rotation- forward

VC 60 VERTI-cutter

The VERTI-cutter’s patented swing-hitch allows the unit to turn during operation increasing maneuverability and the belt drive with 12” diameter blades provides a faster blade RPM (tip speed) improving quality of cut.

Working Width: 54”
Blades: 10GA Carbide Tip, 10GA Hardened Steel
Blade Spacing: Rollers 1.5 – 2″, Skids 2″ Only
Blade Depth Control: 0 – 1 7/8”
Blade Shaft: 1 5/8” Hex Stress Proof
Blade Rotation: Forward
Hitch: Patented 3 PT CAT.1 Trailing Hitch
Drive: 540 PTO Gearbox, 3 belts
Required HP: 20-45 Varies by Cutting Depth
Frame: All Welded Steel Construction
Weight: 900 lbs.
Dimensions: 70” w,46” l, 41” h
Gearbox: Heavy Duty 42 HP (31 KW)

VC 40 VERTI-cutter

1st Products introduces a smaller, compact version of the same quality. The VC40 offers tighter blade spacing from and ½”-2” spacing and an optional thinner blade, makes it the best VERTI-cutter for compact tractors.

Working Width: 35 1/2”
Blades: 10GA Carbide Tip, 16GA Carbide Tip, 10GA Hardened Steel
Blade Spacing: Rollers 1/2” – 2” (1/4” Increments)
Blade Depth Control: 0 – 1 7/8”
Blade Shaft: 1 5/8” Hex Stress Proof
Blade Rotation: Forward
Hitch: Patented 3 PT CAT.1 Trailing Hitch
Drive: 540 PTO Gearbox, 3 belts
Required HP: 20-45 Varies by Cutting Depth
Frame: All Welded Steel Construction
Weight: 800 lbs.
Dimensions: 51” w, 24” l, 44” h
Gearbox: Heavy Duty 42 HP (31 KW)

500-1750 lb Fertilizer Hopper

The new low profile box is wider and easier to fill. The variable speed ground drive allows for 75 quick-rate changes and requires NO TOOLS to adjust.

2, 3, or 4 Outlets Stainless Steel Hopper and Auger
Mounts available for Flat, 3 1/2 – 4” Diamond, and Pittsburgh Cultivators (order kit bundles)
2, 4, 6, 8, 12 row Tool bars available
Removable Auger Trough for easy cleaning
Stainless Steel Latches
Ground, Hydraulic or Electric Drive
Variable Speed Ground drive- 60-1750 lbs/ac.
Hydraulic Drive- 70-1825 lbs/ac.
500 lb Hopper capacity
Additional 500 lb and 750 lb extensions available for more capacity.
Stainless Steel screen
Stainless Steel Bridges
Box Covers
Flexible Hoses

Orchard Fertilizer Applicator

Designed to apply granular material to orchard rows, vineyards, and trees.

With adjustments to accommodate up to 12’ Rows, each hopper has its own variable rate electric drive that will apply 31lbs up to 2000 lbs per acre depending on row spacing. The Orchard Frame bar can be operated with 1 or 2 hoppers.

The 250lb. stainless’ hoppers capacity can be doubled to 500lbs. per hopper by adding the optional extension. The optianl stainless steel lid keeps yur material dry over night. The spouts and hoses can be adjusted for precise fertilizer placement.

Up to 12’ rows
Variable rate electric drive
31-2000 lbs. per acre
1 or 2 row
250-500lb hopper capacity
Stainless Steel hopper and auger
Removeable trough for easy clean out
Optional stainless steel lid

250-500 lb Fertilizer Hopper

The Economy Fertilzer Applicator is the ideal setup for small acres such as food plots, home gardens, and vegetable growers. This all stainless steel hopper consists of 2 or 3 outlets, removeable auger trough for easy cleaning, 250 lb. capacity hopper. Add the 250 lb. extension to increase capacity to 500 lbs.

2 or 3 outlet Stainless Steel Hopper and Auger
Removable Auger Trough for Easy Cleaning
Stainless Steel Latches
Flexible hoses for maximum elasticity
Ground or Electric Drive available
Ground drive- 42-600 lbs/ac (depending on row spacing)
Electric Drive 31-2000lbs/ac (depending on row spacing)
250 lb. hopper capacity
Optional 250 lb. stainless extension available for more capacity
Optional Stainless Steel lid available
Mounts for Pittsburg, 2 ½ Diamond, and Flat Tool Bar included.
Side Dress 3-pt frame and Pittsburg Frame available separately.

3/8 x 1 1/4 PLOW BOLT

Product Description

10ft MULTI-drill | ND-120

5ft MULTI-drill | ND-60

CM7000-LD

CM7000-L

CM7000-HL

12ft MULTI-drill | ND-144

8ft MULTI-drill | ND-96

6ft MULTI-drill | ND-72

5ft MULTI-drill | ND-60T

AG144 AGRI-vator - 12'

AG96 AGRI-vator - 8'

AG72 AGRI-vator - 6'

AE40E AERA-vator Tow Behind

Groundmaster® 360: AERA-vator

Universal AERA-vator 60T

DO40 AERA-vator Mini Skid Steer

VC40/VC60 Sprig Digger

VC 60 VERTI-cutter

VC 40 VERTI-cutter

500-1750 lb Fertilizer Hopper

Orchard Fertilizer Applicator

250-500 lb Fertilizer Hopper