Groundmaster® 360: AERA-Vator

The Groundmaster® 360 works with four of the 1st Products 60” shafts (AERA-Vator 60” Shaft, Slicer 60” Shaft, Multi-tine 60” Shaft , Coring 60” Shaft) enhancing and complimenting the versatility of the GM®360. Order below or click here for more information about the Groundmaster.

SKU: GM82-001 Category:

Product Description

The following 1st Products shaft attachments are available for the Groundmaster® 360 for increased versatility. The AERA-Vator 60” Shaft using solid vibrating tines can be used for sports fields and golf courses for routine aerification and compaction relief in the hardest conditions. The Slicer 60” Shaft with its 4” blade can be used for slicing and stress relief in all turf applications with minimal disturbance. The 2” Multi-tine 60” Shaft makes a great seedbed for over-seeding tees, fairways and sports fields. The Coring 60” Shaft uses side-eject tines with variable depth control using the weight of the GM®360.

Need more shaft information? Click here for full descriptions or read below for specs:

AERA-Vator 60” Shaft,

  • Weight* – 900 lbs
  • Working Width – 60”
  • Center Drive Gearbox – 1:1 Rt Angle
  • End Drive – 4 “BX” 46 Belts (Each End)
  • Tine Vibration Frequency – @540 PTO RTM = 800 Cycles/Minute
  • Heavy Duty Lift/Trail Hitch – 3 ft Turn Radius (approximate)
  • Drive Line – 1 3/8” Spline with Safety Shield
  • Finish – Black Polyurethane with Grey Trim
  • Roller Diameter – 8 5/8”
  • Rake Teeth Spacing – 3 ¾” (approximate)
  • Tractor Requirement – 30-40 hp. Minimum Lift Capacity – 1375 lbs.

Slicer 60” Shaft

  • Weight – 155 lbs
  • Vibrating Depth – 4 ¼” Full Depth
  • Aeration Density – 6-7 Slits per square foot (approx.)
  • Blade Spacing – 5”
  • Blades – 5” long, 10 GA Hardened Spring Steel (80ea)
  • Rotor Bearings – 50mm Ball Bearing
  • Vibration Blade Travel – 5/8” Vertical

Multi-tine 60” Shaft

  • Weight – 245 lbs
  • Side-to-Side Tine Travel – 1/2”
  • Vibrating Depth – Up to 2” Deep
  • Aeration Density – 55 holes per square foot
  • Shells (6 per Rotor) – 36
  • Rotor Bearings – Double Sealed Tapered Roller

Coring 60” Shaft

  • Weight – 145 lbs
  • Coring Depth – Up to 4 ½”
  • Aeration Density – 5-6 Holes per square foot
  • Spoon Spacing – 5”
  • Spoons – ¾ I.D., Hardened Steel Spoons (96 ea)
  • Bearings – Oil Impregnated Bronze